How to care for your Ausorigins artwork

How to clean your piece

When we create a piece from old growth timber we treat the wood with a water based solution. This solution has been created with years of research and testing to keep the true colour of the wood as we found it, by nature.

To clean the dust off your piece either blow it off gently with compressed air or with the upholstery fitting on your vacuum cleaner, very gently remove the dust.

Us a dry cleaning cloth to wipe flat areas clean, gently.

Never use water or spray chemicals to clean any of the timber!

The solution that we use to stabilize the wood is an environmentally friendly, water based mixture. This will if any water is spilt onto your piece make the surface go a milky white colour. This is normal and will disappear when it dries out!

Do not soak or submerge your artwork to clean it, ever.

Though the L.E.D light used to highlight your piece is low voltage it is still an electrical circuit and should never be subject to water, ever.

Cleaning the Quartz Crystal

To clean the surface of the Quartz Crystal or Salanite, you can use a moist cleaning cloth to wipe the surface of the stone.